[05.2024] HINO DX3 DX III 1.24.3 Truck Diagnostic Software Installation Service

Description

HINO DX3  DX III has the same functions as the conventional HINO DX3 as an on-board diagnosis tool and the following functions have been added and enhanced.

Vehicle Category – Automation of Exhaust Gas Symbol Selection
Applicable devices for installation can be determined from the engine software part number, and the devices can be automatically read out. If the on-board device information of the connected vehicle is saved in the server, the on-board device can be read out precisely. (Online only)

Supporting Simultaneous Data Monitoring of Multiple Devices
Data can be monitored for up to three monitor items simultaneously.
The combinations that can be monitored simultaneously are as follows:
CAN/CAN/CAN, CAN/CAN/SIL, CAN/CAN, CAN/SIL.
(CAN: CAN communication, SIL: serial communication)

Timeline Management by Saving the Work History for Each Task
The work history can be automatically saved for each task.
The saved data can be checked in a batch by [DX3 timeline search] (see the image below) in GSPS.

Note:After payment,you will get the download link on payment page,if you can’t get it,please contact us:autoepccatalog@outlook.com.

Our tech team will install and activate it for you,and Price only for ONE PC activation

 

Hino DX3 DX III Features:

Date:05.2024
HinoDX3.exe = 1.24.3
DBFile = 1.24.3.0
CmdDbApi.dll = 0.21.0
CmdCom.dll = 0.21.0

Language:Japanese,English,Chinese,Spanish,Thai,Russian,French,Indonesian,Vietnamese
O.S:Window XP,Window7,Window 8 & Window 10
Market:All Region (DEF,JPN,USA,CAN,AUS,CHN,ESP,COL,CHL,HKG,TWN,RUS,GBR,IRL,SGP,THA,NZL,KBL,TLF)

 

Hino DX3 Function List:

– Acquires and deletes trouble data.
– Warps the trouble codes read from the ECU to workflow sequences corresponding diagnostic and directly displays the required data diagnosis.
– obtains conditions when vehicle sensor problems (freeze frame function) occur.
– Monitors the sensors and actuators equipped on the engine (monitor function data) and test the operation of the solenoid valves to force operating them (Active Test function).
– Simulates diagnostic work with only a PC (Simulation function).
– Automatically saves the data from the ECU and analyzes the problems based on the stored data even when you can not understand the cause of the problems.

 

HINO DX3 05.2024 Video Show:

 

HINO DX3 Update History:

Ver.1.24.3
Updated the database.
Fixed some bugs.
1) When searching for diagnosis history on the GSPS side,some information is not displayed in the vehicle classification in the search results.

Ver.1.24.2
-Fixed some bugs.

Ver.1.24.1
-Updated the database.
-Fixed some bugs.

Ver.1.23.10
-Updated the database.
-Fixed some bugs.

Ver.1.23.9
-Updated the database.
-Fixed some bugs.
-Some devices that cannot be diagnosed by Denso’s interface “DST-010” can now be supported.

Ver.1.23.8
-Updated the database.
-Fixed some bugs.

Ver.1.23.7
-Updated the database.
-Fixed some bugs.
-Implemented a function conforming to “Past work information” of Hino DXII.
Follow the steps below to check.
HOME screen – Special working – Past work information list
-Since the repro work after replacing the supply engine is different for the ECU direct engine and the non-direct engine, the explanation of each work content is described in the “Notes” column.

Ver.1.23.6
-Updated the database.
-Fixed some bugs.

Ver.1.23.5
-Updated the database.
-Fixed some bugs.

Ver.1.23.4
-Updated the database.
-Fixed some bugs.
-Vehicle reconnection prevention function has been implemented.
1) If the connection with the vehicle cannot be confirmed for a certain period of time during the diagnosis, a confirmation screen will appear prompting you to check the connection status of the connectors and cables.
After the confirmation screen is displayed, screen operations are restricted until the connection with the vehicle is confirmed.
*The connection is checked when operating the screen, and if it can be confirmed, the operation will be executed, and if it cannot be confirmed, the confirmation screen will be displayed again.
2) When checking the connection after the confirmation screen is displayed, if a connection to another vehicle is detected, a warning screen will be displayed and the diagnosis will end.
-When accessing GSPS from the HINO DXⅢ screen, it is no longer necessary to enter the ID/PW on the browser side. (Digital certificate selection is still required)
This function is only compatible with Microsoft Edge.
If you are using a browser other than Microsoft Edge, please switch to Microsoft Edge.
-The screen display when referring to the device information installed in the vehicle learned in the past has been changed.
Before) Confirm the connection of only the referenced device, and display only the referenced device on the system selection screen
After) Confirm the connection of only the referenced device, and display it on the system selection screen including other devices than the referenced device
-Implemented the installer manual download function. (in the “Other” function)
User can check the installer version update status at any time.

Ver.1.23.3
-Updated the database.
-Fixed some bugs.
-Active test can now be performed even when the data monitor item is selected and the data monitor is not being executed.
*To start the data monitor, it is necessary to end the active test once.
-System information and memo contents of the played file are now displayed on the data monitor playback screen.

Ver.1.23.2
-Updated the database.
-Fixed some bugs.

Ver.1.23.1
-Updated the database.
-Fixed some bugs.
-Added language support. (Vietnamese)

Ver.1.22.12
-Updated the database.
-Fixed some bugs.

Ver.1.22.11
-Fixed some bugs.

Ver.1.22.10
-Updated the database.
-Fixed some bugs.

Ver.1.22.9
-Updated the database.
-Fixed some bugs.

Ver.1.22.8
-Updated the database.
-Fixed some bugs.

Ver.1.22.7
-Updated the database.
-Fixed some bugs.

Ver.1.22.6
-Fixed a bug in the data transmission / reception function with the server.

Ver.1.22.5
-Function addition
A print function for timeline data (work history) has been added to “Special working”.

Ver.1.22.4
-Updated the database.

Ver.1.22.3
-Updated the database.

Ver.1.22.2
-Updated the database.

Ver.1.22.1
-HINO DXⅢ has been released.